Shopping Cart

Item description


Going the long distance with POE switch, you can use this POE Switch to go up to 820 feet (250 Meters). When going that distance you must use 100% copper cable to reach that distance.

This 8 Port Long distance POE switch will power 8 cameras up to 820 feet on small camera, on motorized and bigger cameras with stronger IR the distance may vary. When using this switch please consider the camera adding to the line at that distance. 

Product Profile

WS-POE8E is a 9 port 100 Mbps with 8 port PoE port switch, auto detection and identification IEEE802af/at standard PD device than carry power to it. Therefore do not worry it will destroy the private standard PoE or Non-POE equipment. it is the best choice for the minitype commercial network because it is economically used PoE deployment wireless AP and IP camera. it can resolve the problem of maintenance tedious wireless coverage, ternimal device powered, surveillance project with maximum saving on the cost of the project. 

Key Features

  • Support POE (power over ethernet cable device) for example wireless AP and IP cameras
  • Support IEEE802af/at standards
  • Transmission distance 250 meters or 820 Feet,  making installation for wireless AP and Surveillance Project
  • it will give the speed of 10 Mbps at 250 meters when connecting an IP camera.
  • Supports Upward port auto MDI/MDIX
  • Adopted storage forward switch system
  • Smart Power and minimum consumption, guarantee PD requirement
  • With power supply circuit projection function and protection back-end device safety
  • Automatically provide the adaptive device
  • PSE modular design
  • Support loop circuit detection
  • Support saving power function when port unconnection

Working Mode

Using DIP switch control mode:

  • Default: default switch mode
  • VLAN: prevent DHCP deceive and broadcast storm, projection information, prevent virus spread and network attack.
  • Extend: Transmission Distance Cat5 or above (Cat6 Recommended)

Performance

1.8Gbps (non-blocking), Network delay (10 to 100Mbs): Maximum 20 microseconds (using 64-byte packet), Mac Address capacity: 1k
Frames filter and transmission rate: 10M port Maximum 14,00pps, 100M port maximum: 148,800pps

 

To enable long distance on the switch, you will need to put it on extend mode to have the switch in long distance mode. 

 


* Distance may vary depending on the quality of the cable, this switch will not reach on CCA cable must be 100% copper. 

See more product details Download spec sheet
You must be logged in to view price
Get quote

Get A quote


Category : Accessories
Share your opinion

Manufacturer : worldstar Model number : WS-POE8E


Product Details

Going the long distance with POE switch, you can use this POE Switch to go up to 820 feet (250 Meters). When going that distance you must use 100% copper cable to reach that distance.

This 8 Port Long distance POE switch will power 8 cameras up to 820 feet on small camera, on motorized and bigger cameras with stronger IR the distance may vary. When using this switch please consider the camera adding to the line at that distance. 

Product Profile

WS-POE8E is a 9 port 100 Mbps with 8 port PoE port switch, auto detection and identification IEEE802af/at standard PD device than carry power to it. Therefore do not worry it will destroy the private standard PoE or Non-POE equipment. it is the best choice for the minitype commercial network because it is economically used PoE deployment wireless AP and IP camera. it can resolve the problem of maintenance tedious wireless coverage, ternimal device powered, surveillance project with maximum saving on the cost of the project. 

Key Features

  • Support POE (power over ethernet cable device) for example wireless AP and IP cameras
  • Support IEEE802af/at standards
  • Transmission distance 250 meters or 820 Feet,  making installation for wireless AP and Surveillance Project
  • it will give the speed of 10 Mbps at 250 meters when connecting an IP camera.
  • Supports Upward port auto MDI/MDIX
  • Adopted storage forward switch system
  • Smart Power and minimum consumption, guarantee PD requirement
  • With power supply circuit projection function and protection back-end device safety
  • Automatically provide the adaptive device
  • PSE modular design
  • Support loop circuit detection
  • Support saving power function when port unconnection

Working Mode

Using DIP switch control mode:

  • Default: default switch mode
  • VLAN: prevent DHCP deceive and broadcast storm, projection information, prevent virus spread and network attack.
  • Extend: Transmission Distance Cat5 or above (Cat6 Recommended)

Performance

1.8Gbps (non-blocking), Network delay (10 to 100Mbs): Maximum 20 microseconds (using 64-byte packet), Mac Address capacity: 1k
Frames filter and transmission rate: 10M port Maximum 14,00pps, 100M port maximum: 148,800pps

 

To enable long distance on the switch, you will need to put it on extend mode to have the switch in long distance mode. 

 


* Distance may vary depending on the quality of the cable, this switch will not reach on CCA cable must be 100% copper. 

This item hasn't been review yet
Warranty
1 Year
Power Indicators
Power: LINK/ACT; POE
EMC
CE Class B FCC Part 15, Class B CVVI Class B C-Tick
Network Interface
8 10/100 Mbps POE RJ45 (Port 1 ~ port 8) + 1 Uplink port 10/100Mbps
POE Pin
1/2(+), 3/6 (-), or customized 4/5 (+), 7/8 (-);
Power Supply
100 - 240 vac, 50-60hz 96W
Protocols and Standards
IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x Flow control, IEEE 802.3af Power Over Ethernet (POE)
Certification
CD, FCC, RoHS
Environment Temperature
Operating temperature: 0~40 degrees Celsius, Storage temperature: -10~70 degrees Celsius, Operating Humidity 10~70% non-condensing, StorageHumidity 5~90% non-condensing,
Performance
1.8Gbps (non-blocking) , Network delay (10 to 100Mbs): Maximm 20 microseconds (using 64 byte packet), Mac Address capacity: 1k Fames filter and transmition rate: 10M port Maximum 14,00pps, 100M port maximum: 148,800pps
Data Rate
100 Mbps Full Duplex, 10 or 100 Mbps Hal Duplex, Network interface 10BASE-T or 100BASE-TX Ethernet Port
Dimension
184x94x27mm

Categories

Create An Event

Event Info

To begin, please enter the date of the event

Time Information

Date format MM/dd/yyyy
Time format hh:mm:ss

Pricing Information

There will be a handling charge on top of the ticket sale of $8.00

Address Information

Where would the location of the event?

Address Information Cont

Contact Information

Event Description

No HTML code, any HTML code will be strip from text.

Event Confirmation

Please review your event informaiton before saving