SCN-POE-104 is a 4-port 10M/100M Fast PoE Switch with one uplink port + 4 ports of Power over Ethernet capability. Per PoE port is power supply up to 15.4W. The total POE power budget is 65W Compataible with IEEE 802.3af Supports ...
PoC&PoE Network Converter Transmitter/Receiver 4 Port
Item description
Introduction
Based on EoC, PoC, PoE and other technologies,The unit can simultaneously transmit 100Mbps network signal, power supply signal on a coaxial cable, two core wire, network cable and other media. The transmission distance also breaks through the traditional PoE limitation restricted 100 meters, up to 500 meters; pure network data transmission can reach 1000 meters.
The device is fully compatible with IEEE802 LAN standard series network protocol and supports 128bit AES encrypted transmission. Support star, bus, hybrid networking, plug and play and other features. It is suitable for various applications such as analog video surveillance to network high-definition upgrade, and network PoE extended transmission, etc.
Features
- Power and network signal transmission distance can be up to 500 meters;
- Support IEEE802.3af/at PoE standard, Follow IEEE802 network protocol ;
- Supports multiple transmission media such as coaxial cable, two-core wire, network cable, which save cost to make full use of existing resources
- The device supports star, bus, and hybrid networking, which can meet the networking requirements of various environments;
- Supports plug and play, no need to adjust /change any configuration of the original or new network to use;
- Supports 128bit AES encryption, data transmission is safe and reliable
Product Details
Introduction
Based on EoC, PoC, PoE and other technologies,The unit can simultaneously transmit 100Mbps network signal, power supply signal on a coaxial cable, two core wire, network cable and other media. The transmission distance also breaks through the traditional PoE limitation restricted 100 meters, up to 500 meters; pure network data transmission can reach 1000 meters.
The device is fully compatible with IEEE802 LAN standard series network protocol and supports 128bit AES encrypted transmission. Support star, bus, hybrid networking, plug and play and other features. It is suitable for various applications such as analog video surveillance to network high-definition upgrade, and network PoE extended transmission, etc.
Features
- Power and network signal transmission distance can be up to 500 meters;
- Support IEEE802.3af/at PoE standard, Follow IEEE802 network protocol ;
- Supports multiple transmission media such as coaxial cable, two-core wire, network cable, which save cost to make full use of existing resources
- The device supports star, bus, and hybrid networking, which can meet the networking requirements of various environments;
- Supports plug and play, no need to adjust /change any configuration of the original or new network to use;
- Supports 128bit AES encryption, data transmission is safe and reliable
- Connector DC OUT
- DC12V power output; 2pin connector
- Connector Ground
- M4 Screw
- Indicator PWR
- Power indicator
- Connector DC24~56V IN
- power input; 2.1*5.5mm DC connector
- Only Data Transmission Distance
- Up to 1000 meters
- Indicator LINE
- Physical link connection indicator. When cable is connected, the indicator is always on or blinking. If the indicator is not on, please check the MODE switch settings and transmission line.
- Terminal input
- Non-POE: DC24V~DC56V POE Fuction: DC48V~DC56V (PoE optional)
- Protocol ADSL
- IEEE802
- Indicator POE(Yellow)
- PoE indicator: light is always on with PoE output
- Power Consumption
- ?2.5W
- Connector MODE
- MODE switch (S is slave ; M is master)
- Working Temperature
- -10~60 degrees celcius
- Indicator MSTR
- When the MODE switch is set to M mode, this light should be always on
- DC Output
- DC12V1.5A
- Connector Line
- (Do not connect to terminal device directly) BNC Female, 2pin connector, RJ45
- PoE Standard
- IEEE802.3 af/at(POE function optional)
- Relative Humidity
- 5~90%, no condensation
- Indicator LINK(Green)
- when Ethernet connection has data activity, the indicator flashed
- Data&Power Transmission Distance
- Up to 500 meters
- Transmission Medium
- Coaxial, 2-wire, CAT5/6
- Connector LAN
- RJ45 10/100Mbps
- Master/Slave Setting
- Setting MODE switch before power-on (S is slave and M is master) Please set to M(master) for Receiver and S(slave) for Transimitter The device needs to be powered off and restarted when toggle MODE switch in the power-on state